Low Cost Comprehensive Crusher

The low cost comprehensive crusher mainly grinds some wood and has good performance. Strictly follow the requirements to operate the equipment during use in order to run the machine better. When we encounter a malfunction, we need to find a solution. In the following text, the editor introduces the faults and repair techniques of the comprehensive crusher, as well as solutions for slow start. Let's take a look.

1. When fastening the flying blade and bottom blade of the low cost  comprehensive crusher, use a torque wrench and torque converter with accurate torque, and tighten them according to the specified torque value. Flying blade bolts and bottom blade bolts are special high-strength bolts (with symbols on the bolt heads);

2. Ordinary bolts cannot be used to prevent defects, nor can they be used to prevent defects. The service life of high-strength bolts is one year, and they need to be completely replaced after one year of use;
3. It is necessary to replace the flying knife in a complete set. When grinding, the grinding amount of the two flying knives should be combined to ensure that the weight of each flying knife is the same and prevent machine vibration;
4. Cooling liquid needs to be added when grinding the flying blade and bottom edge to prevent the blade from overheating, burning or curling, in order to ensure the wear resistance of the blade;
5. Flying knives are usually sharpened once every 1-2 shifts. After changing the flying knife 4 times, the bottom knife needs to be pulled out;
6. Check the condition of the bottom blade of the low cost comprehensive crusher and replace the bottom blade (the bottom blade usually has 2-4 blades, one blade is worn, and the other blade is replaced. After all blades are worn, grind them once);
7. The contact surface of the bottom blade holder should be lubricated to facilitate easy removal of the bottom blade holder when replacing it; The scheduling standard for flying knives is a fixed value and cannot be changed. If the distance between the flying knife and the bottom knife does not meet the regulations, the bottom knife standard can only be adjusted.
The previous text is an introduction to the troubleshooting techniques for wood drum type low cost comprehensive crushers. You can learn about these contents and contact us if you have any questions.